images

Post your suggestions for new tutorials or anything here!
Post Reply
iplayfast
Posts: 2
Joined: March 24th, 2013, 11:18 pm

images

Post by iplayfast » March 10th, 2014, 2:32 am

Trying to follow through the tutorials, and am on the button one.
Where is pin 50? and where is 5V that we can attach the pullup to.

The lettering on the board is so small, I've stared at it for 1/2 hour and still can't find them.

embmicro
Site Admin
Posts: 834
Joined: March 24th, 2013, 12:45 pm

Re: images

Post by embmicro » March 18th, 2014, 11:29 am

Pin 50 is in the second (lower) row, third pin from the left on the top header. Right next to it is V+ which is 3.3V and is what you should use as a pull up. The FPGA is not 5V tolerant. I'll look into getting some drawing of the Mojo with the pins labeled so it's easy to see what is what.

I hope this helps,
Justin

Post Reply