Schematics examples in ISE.

Post your suggestions for new tutorials or anything here!
Post Reply
Posts: 1
Joined: August 23rd, 2013, 9:16 pm

Schematics examples in ISE.

Post by djwillms » August 23rd, 2013, 9:25 pm

Sample schematic components that allow all the existing examples to be done in a drag and drop and connect the wires fashion.

Id like to see an LED component schematic. That allows me to do this:
Drop an LED on the schematic.
Drop a timer on the schematic.
Drop a PWM on the schmatic.
Connect the timer to the PWM
Set the timer interval.
Set the PWM output rate.

Bonus things would be schematics that allow connecting the a2d from the AVR and directing those signals into the LEDs

Id love to see how to address each pin on the mojo using the schematics.

Post Reply