LED Shield Step by Step Instructions

Post your suggestions for new tutorials or anything here!
Post Reply
mark3575
Posts: 3
Joined: August 10th, 2013, 4:24 pm

LED Shield Step by Step Instructions

Post by mark3575 » August 10th, 2013, 5:26 pm

Can someone post step by step instructions for getting the LED shield to work as a clock / audio visualizer? I am completely new to mojo and FPGAs.
Thanks,
Mark

smithh
Posts: 6
Joined: September 17th, 2015, 3:40 am

Re: LED Shield Step by Step Instructions

Post by smithh » December 18th, 2015, 2:24 pm

Did the demo code or a tutorial ever get posted for the visualizer shield? I'd like to do something different with the leds.

embmicro
Site Admin
Posts: 834
Joined: March 24th, 2013, 12:45 pm

Re: LED Shield Step by Step Instructions

Post by embmicro » December 21st, 2015, 10:51 am

While we don't have a full blown tutorial, there is the demo code available on the product page here https://embeddedmicro.com/products/cloc ... hield.html under "More Information"

Also to get it to work as a clock/visualizer, just load the .bin file in the syn directory of the demo project with the Mojo Loader.

Post Reply