Mojo Loader doesn't find a COM port

Need some help on a project you are working on or got stuck on a tutorial? Post your questions here.
Post Reply
Wurzelsepp
Posts: 1
Joined: June 18th, 2013, 2:10 am

Mojo Loader doesn't find a COM port

Post by Wurzelsepp » July 8th, 2013, 7:37 am

It seems I have faild the intelligence test Creating a Project. The Mojo Loader version 1.1.2 refuses to download my very first Verilog program.

FLIP download of Firmware Mojo-Loader-1.1.hex ends with Verify PASS

ISE Project Navigator: Generate Programming file => No Errors

Windows 7 Hardware Manager: Connection => Mojo CDC-ACM Virtual serial Port (COM7)
device functions error free

Mojo Loader Version 1.1.2, COM7, Open Bin File = \Mojo-Base\syn\mojo_top.bin
Load => Error! Mojo did not respond! Make sure th port is correct
COM1: Load => Error! Mojo did not respond! Make sure th port is correct
COM2: Load => Error! Mojo did not respond! Make sure th port is correct

Obviously the USB port does speak with Atmel's FLIP.
ISE generates the example program without error.
Windows 7 Hardware Manger has installed all driver (there are no yellow remarks).

Has someone an idea what I missed or where I fooled?

***************************************************************************
Problem solved!
I have Changed ATMega-Firmware from Mojo-Loader-1.1.hex to Mojo-v2-Loader.hex

Post Reply