Page 1 of 1

Sample Codes and Interfacing

Posted: May 12th, 2016, 12:14 am
by gabgeslani
Hello Embedded Micro!

I am an FPGA user and I recently bought your Mojo V3. Can I ask for sample codes on different applications using the FPGA. I would like to use it to control LEDS (blinking), 7 Segment Displays (use as counter either by clock or controlled by switch) and also for motor control (DC or Servo) It would really help. THANKS!

I would also like to ask if the Mojo V3 is capable of interfacing with Analog Sensors, LCD, GSM or Bluetooth modules.