NTSC Shield... It Works!

Projects you are planning or working on with the Mojo
Post Reply
kj6msg
Posts: 19
Joined: January 27th, 2015, 9:14 pm
Location: Virginia
Contact:

NTSC Shield... It Works!

Post by kj6msg » June 21st, 2017, 8:33 pm

Check out my NTSC Shield I designed for the Mojo V3. It's taken me a while to get it working, mostly because life gets in the way.

https://hackaday.io/project/25560-ntsc-shield

embmicro
Site Admin
Posts: 834
Joined: March 24th, 2013, 12:45 pm

Re: NTSC Shield... It Works!

Post by embmicro » June 22nd, 2017, 3:24 pm

This is awesome! Great job getting it to work!

kj6msg
Posts: 19
Joined: January 27th, 2015, 9:14 pm
Location: Virginia
Contact:

Re: NTSC Shield... It Works!

Post by kj6msg » June 23rd, 2017, 9:11 pm

Thanks! Verilog source is available on Github now (that was a new learning experience).

kj6msg
Posts: 19
Joined: January 27th, 2015, 9:14 pm
Location: Virginia
Contact:

Re: NTSC Shield... It Works!

Post by kj6msg » June 27th, 2017, 10:32 pm

New updates on the Hackaday.io page https://hackaday.io/project/25560-ntsc-shield

I added BMP file output to the test benches to QA what you'd see on the television screen.

kj6msg
Posts: 19
Joined: January 27th, 2015, 9:14 pm
Location: Virginia
Contact:

Re: NTSC Shield... It Works!

Post by kj6msg » July 5th, 2017, 4:18 pm

The Data Bus Test and Device Test now function for the onboard SRAM on the NTSC Shield. Time to finish the Address Bus Test and I'll be done!

https://hackaday.io/project/25560-ntsc-shield
https://github.com/kj6msg/ntsc-mojo

Post Reply